Guarantee of high quality carbon produced by charcoal machine

Every customer who buys charcoal machine wants to produce high quality charcoal, so how to do it? First of all, we should choose the equipment with good quality: 1. Choose the accessory of charcoal machine - screw propeller, which must be resistant to high temperature and wear. 2. Problems with charcoal dryer. If the air in the south is humid, the roller type shall be selected and the size shall be selected as required. 3. The rod making machine of the charcoal machine depends on the circuit and the structure of the machine body. Stable operation and provide matching screw propeller maintenance technology.
Secondly, whether the screw propeller is qualified also determines the quality of charcoal. Screw propeller is a wear part. In the process of high-speed rotation, the top of screw propeller contacts with raw materials, and the end face of screw propeller is seriously worn. When the angular density of the end face becomes smaller or the contact surface is rough and speckled, the charcoal produced cannot meet the requirements, or even cannot be produced. At this time, we should repair the propeller according to the method taught by the manufacturer's technicians to meet the technical requirements. As long as the operators often practice and explore, it is easy to master.
The basic process of charcoal production line should first be understood as the customers of initial contact mechanism charcoal production. First, the material is crushed and then dried. The drying effect is that the moisture content of raw material is about 8% ~ 12%. Too dry or too wet will affect the production effect of the rod making machine. The third part uses the so-called rod making machine. In the process of production, the welding of screw propeller must be paid attention to. And the carbonization rod. Pay attention to heating speed and time during carbonization.
Of course, there is also high-quality after-sales service, which has a lot to do with the production of high-quality charcoal machines. With a good after-sales service, the technical problems in the use of your equipment are the responsibility of the manufacturer. The equipment faults can be solved in time, of course, it is easier to produce high-quality charcoal.