Carbon Machinery Equipment Manufacturer Teaches You How to Produce High Quality Machine Carbon

Because of its environmental protection and energy saving, mechanism charcoal has gradually become an indispensable product in our production and life, making our life more meaningful. Machined charcoal is produced by charcoal machine equipment, and the quality of the equipment is the basis of charcoal making. Without good equipment as a prerequisite, everything is in vain. From the production process of charcoal machinery equipment, the factors affecting the quality of charcoal production are not only the quality of equipment, but also the raw materials of equipment, whether the propeller is qualified, the temperature of rod making, etc.

1. Charcoal machine raw materials: Charcoal machine equipment requires high humidity of raw materials. Humidity is often referred to as water content. Humidity greater than 12%, less than 5% can not come out good, more stringent bamboo chips. Some people will ask how to control humidity. In fact, there are also very simple methods, the use of hygrometers, there is the feeling of the hand, the general mechanism charcoal manufacturers feel with the hand, if the humidity is too wet, the feeling is that the material is closely integrated, this method is to slowly explore and practice experience.

2. Bar-making machine propeller: Whether the propeller of the matching equipment of charcoal machine is qualified also determines whether the quality of the rod is qualified. Make it meet the technical requirements, as long as the charcoal machine operators or maintenance personnel often practice and explore, it is easy to master. The propeller wears easily. The friction force produced by the contact between the top of the thruster and the original material during high-speed rotation makes the end face of the thruster worn seriously. When the angle of the end face becomes smaller or the contact surface becomes rough and speckled, the resulting rod will not meet the requirements, or even not stick. At this point, we should repair the screw propeller according to the method taught by the manufacturer's technicians.

3. The working temperature of the rod-making machine: The temperature of the forming cylinder of the rod-making machine in the series of charcoal machine equipment is generally controlled between 260 and 300 degrees C. Temperature depends mainly on raw materials. First of all, we should know that the purpose of heating raw materials is to soften lignin and increase viscosity so as to form under high pressure. If the temperature is too high, the rod is not firm and easy to form fracture cracks. Therefore, when using charcoal machine equipment, we should repeatedly explore the appropriate production temperature range. Generally speaking, the temperature of bamboo and wood bars is lower, which is suitable for 260 ~300 C. Straw and rice husk can be selected at 300 C or 320 C. Of course, the selection of temperature should also take into account the actual moisture content of raw materials, but the rod body is not firm and soft. If it is too low, the viscosity of the raw material is poor, and the temperature of the rod made from the same raw material is different, which is mainly controlled by the operator flexibly. In addition, the outer surface of the rod need not be too dark, brown and black can be.