New users also need clinker to operate charcoal machine equipment

For users who have just come into contact with charcoal machine equipment, they do not know much about the production line, nor do they know what problems should be paid attention to in production. If put into production, it is easy to cause the failure of charcoal machine or the production mechanism charcoal can not be used.

The production process of charcoal machine is generally divided into comminution stage, drying stage, forming stage and carbonization stage. In each of these steps, there are matters needing attention. For example, in the crushing stage, the water content of raw materials should be controlled, the normal water content should be less than 40%, and the water content in the moulding stage should be guaranteed to be about 6% - 12% in order to ensure the quality of machine-made char. When the carbonization period of the carbonization furnace is 8 h, the carbonization rate of the carbonization furnace is also different.

Carbonizing furnace models: 1, 3 cubic meters; 2, 6 cubic meters. The carbonization time of small yield is 2 hours shorter than that of large output. Through proper operation, 2.5 tons of raw materials usually produce one ton of finished carbon. In this process, the temperature of the carbonization furnace must be strictly controlled to avoid carbon entrainment or excessive combustion.

Charcoal machine is mainly used to produce charcoal equipment. The new charcoal machine plays a key role in the use process. The charcoal quality is determined by the carbonization furnace. Therefore, customers who buy new charcoal machines must have a clear understanding of the use of charcoal furnaces.

In the carbonization process of the carbonization furnace, the structure of the new type of carbonization furnace will be different due to the different raw materials and sizes. In the carbonization process, the technical requirements of the carbonization furnace are higher, and the carbonization time, temperature and method are also different.

Generally speaking, the carbonization furnace is designed as a vertical carbonization structure, discharging once an hour and feeding process. Raw materials need to go through three stages: preheating, carbonization and cooling from the inlet to the outlet. The residence time in the furnace is about 4 hours, the carbonization temperature is 450 ~460 C, and the carbonization efficiency is 25%~30%. The annual production capacity can reach 200 t, and the high temperature can generally reach 400 C. This is the requirement that the carbonization furnace meets, the production capacity is good, the quality of formed carbon is high, so as to achieve the satisfaction of users.

The above is a comprehensive introduction of Jinhe machinery as charcoal machinery equipment. Users can use it when producing machine-made charcoal, and can produce good machine-made charcoal. Welcome to your selection.