What role does the propeller of charcoal machine equipment play?

When many users invest in charcoal machines, their main purpose is to produce high-quality machines to create rich profits, and the screw propeller in charcoal machines is a vulnerable component that affects the appearance and quality of charcoal. Therefore, Jinhe Machinery has carried out the following analysis on the spiral thrusters of most users.

1. The wear part of the new charcoal machine is mainly the screw propeller part above the rod-making machine, because the screw propeller part belongs to the high-pressure forming part, which is worn seriously in daily production. However, the production of screw propellers in various charcoal machinery factories is different, and the technology is difficult, and the configuration is not easy, so it needs to be customized to charcoal machinery factories. Spiral propeller is an important part of steel bar processing machinery, which is related to the pressure density of steel bar. Therefore, the rods produced are observed on the screw propeller, and the wrong angle or the wear of the front end of the screw propeller will cause problems.

2. When technicians come to train technology free of charge, they will give a detailed introduction to the propeller. Another easily damaged part is the cone sleeve. Generally speaking, its life span is more than half a year. The taper sleeve must choose high-quality accessories. The taper sleeve is embedded in the forming tube, which is closely matched and difficult to take out. This method first welds the steel bar to the inner wall of the cone sleeve, then uses water, shrinks with the principle of heat and cold, and can come out with a few taps.

3. Spiral thruster is a vulnerable part of bar making machine. Wear often occurs in the production of machine-made carbon. Therefore, we need to inspect and repair it. The overhaul time of the screw propeller is usually 15-20 shifts. If the frequency of use is too high in a certain period of time, it is suggested to shorten the maintenance time. If the screw propeller of the bar making machine has problems, it will affect the shape and density of the bar making machine, and directly affect the sales of finished carbon.

4. It is suggested that wear-resistant welding rod be used to repair the propeller of charcoal engine. Because the thruster is extruded material, it is also important to make it shape and wear-resistant. After repairing, the thruster is polished with gauze to make its surface smooth, and the products produced are also smooth.

Through the above analysis, I believe that many users have a certain understanding of the charcoal machine accessories. Spiral thruster is a vulnerable component, which requires more attention from users and daily inspection and maintenance. In this way, it not only can be used for a long time, but also saves the investment cost and production effect of users.