How to operate the log carbonization of charcoal machine

As the name implies, charcoal is a series of reprocessing procedures that directly use the charcoal machine to carbonize the log without crushing, drying and forming the rod. The equipment of the carbonizing furnace is mainly used in the process of wood carbonization. First will be placed on a level surface new log carbonization furnace, the furnace can not tilt, will open at the top of the furnace cover, and then will be installed within the stick put charging basket, stick to one insert iron basket, circle rods, more compact effect more ideal. The quantity of carbon wood charcoal mechanism no paid great a high carbon content, if a stove capacity of two tons of log, then after carbonized product of charcoal can achieve 0.8 1.2 tons, because of different wood log, the quantity of carbon will be floating.

Log after the furnace charging, from the ignition mouth below the stove ignition, wood or weeds as an ignition raw materials are available, and a few weeds or sawdust into the reaction tank first, immediately after the light cover, make its produce certain concentration of gas, the gas through pipes into storage tanks at the bottom of the coking furnace, then slowly open the valves of the storage tanks and lighting. Before ignition furnace cover must be shut, and fire prevention asbestos cloth, shall not be leakage and fire into oxygen, log after the light can be natural, and then the back of the coking furnace flue gas generated by, through the gasifier system into can ignite gas, into the bottom of the coking furnace ignition mouth, can open the smoke machine for smoke and fire, smoke fire in three to four hours or so commonly, observable furnace back out of the smoke pipe, if there is no black smoke, can turn off the exhauster, enter a state of flat fire burning itself, burning time for five to eight hours, general carbonization time also in 10 to 12 hours, after the carbonized can open the door for carbon.