Determination of charcoal molding in charcoal machine equipment

In the whole process of charcoal machine, the quality of charcoal is directly determined by the price of charcoal. Customer all hope after the purchase of charcoal machine equipment, able to be quickly put into production and profits, but only if need to master the whole process of charcoal production and operation points for attention, not only have twice the result with half the effort. So what are the precautions that determine the charcoal making of charcoal?

1. The quality and temperature control of the making machine. Make sure that the quality of charcoal must be good. Raw material system of rods are completed in the system bar machine, stick machine, the molding box outside heating circle, it can make the molding sleeve temperatures to rise to about 350 ℃. In order to guarantee mechanism rod surface is smooth, big density, no crack, we can according to raw material types to choose suitable molding temperature and moisture content, and go through the field test, to be sure.

2. The raw material determines the quality of charcoal. The good quality of carbon is determined by the amount of water contained in the raw material, which depends on the equipment and process. The water content of raw materials is usually less than 10%. The first step so we work is dry raw materials, drying the raw material, we can be the raw material for the moisture content is larger in the first open the green coffees which are dry or 1 ~ 2 days, make its surface evaporation, to reduce the thermal drying time and fuel consumption. Then the granularity of qualified raw material into the dryer drying to water content is less than 10% of the dry raw material, the drying temperature is 140 ℃ ~ 300 ℃ or so commonly.

3. Charcoal-burning molding. The carbonization process of low temperature carbon in the carbonization furnace. Drying stage starting from the ignition, and the temperature rise to 160 ℃, then the water contained mechanism rod rely mainly on plus the heat generated by the heat and burn through evaporation.

From the above three points, it can be seen that the forming of charcoal machine product mechanism is closely related to the temperature from the beginning to the end, so it is very important to control the temperature. The operators should control the temperature so that they can make good carbon and make good profits.