Carbon Machinery Equipment Enterprises Use Renewable Resources to Create New Energy

With the rapid development of economy and industry, coal resource is an important energy source of industry. With the increasing demand for charcoal, the charcoal machinery industry has gradually developed. Enterprises have created new energy by using renewable resources. The development principle of charcoal machine is to recycle a large amount of waste. In the process of operation, charcoal calorific value and combustion time play an important role. The higher the carbon content of charcoal, the higher the calorific value, which depends on the degree of raw materials and combustion factors.

The calorific value of charcoal is not directly related to the burning time of the fuel. The higher the carbon content of charcoal, the higher the calorific value, which is determined by two main factors: raw materials and degree of carbonization.

It can also be said that combustion time is determined by the chemical composition of carbon, and combustion time can be said to be determined by both chemical and physical factors. This is not only due to the high calorific value, but also requires a smaller surface area in contact with carbon and air to prolong combustion time, including external surface and internal pore. Because there are many voids in the raw charcoal, although the calorific value is the same as that of the mechanism charcoal, there is no mechanism charcoal burning for a long time. There are two main ways to improve the combustion time of machine-made charcoal. One is to increase the forming pressure of the rod-making machine, the density and strength of the rod-making machine, and the other is to increase the carbonization temperature of the carbonization furnace, slow down the heating and cooling speed, so that the density and hardness of the finished products are high. These two ways are also important ways to improve the quality and price of the machine-made carbon. This requires that the contact area between charcoal and air should be relatively small in order to prolong the burning time of charcoal. Charcoal burns for a long time and has high quality. Therefore, in order to speed up the carbonization time, the density and strength of the carbonized products must be increased according to the different carbonization temperature, so that the carbonized products have the characteristics of high density and hardness, and the quality of the carbonized products can also be improved.