Choosing high-quality charcoal machine equipment can make good charcoal

With the gradual depletion of energy, in the next few years, most of the traditional energy will gradually be replaced by new energy. At present, the mechanism charcoal has replaced the traditional charcoal. Machined charcoal is produced by a professional production equipment - charcoal machine equipment. An important step in the whole carbonization process is the indispensable operation steps in charcoal production. Through the carbonization device, the fuel rods produced by the rod-making machine can be put into the furnace for carbonization, thus obtaining high-quality mechanism carbon.

The choice of carbonization furnace is also very necessary. We must select and configure the equipment suitable for your raw materials according to the customer's own requirements, in order to improve the quality of carbonization. The operation method of the carbonization furnace largely determines the quality of carbon production. When the carbonization furnace is running, the rate of water vapor discharge can not be too fast, otherwise the humidity in the kiln is too high, leading to the absorption of steam by carbon rods, resulting in expansion. Secondly, the steam should not be discharged to the carbon rod as far as possible, so as to reduce the chance of the carbon rod to absorb steam and avoid the damage of the machine-made carbon from the source. However, the design of the exhaust port of ordinary carbonization furnace is developing towards the direction of machine-made carbon. In view of this situation, the technicians of Jinhe Carbon Machinery Plant have optimized the carbonization furnace and installed gas outlet at the lower part of the carbonization furnace. It's basically on the same level as the carbon frame. At the same time, the height of chimney is reduced, and the specific height is calculated according to the volume of carbonization furnace and the area of ventilation outlet, so that the quality of mechanical carbon produced can reach the first level.

The operation of carbonization furnace is a work requiring experience, and also a very important link. Once this link is not grasped, it will be discarded. Therefore, the operators must be trained to master the basic production principles in order to ensure the quality of mechanism charcoal.