What are the steps of installation test of charcoal machine equipment?

For charcoal machine equipment, its preliminary installation is very important, which will affect the later production of new charcoal machine and its production efficiency and quality. If the initial installation is not in place, it will lead to the production of charcoal machine equipment, will also cause failure, shorten the service life of charcoal machine equipment, which will cause unnecessary losses to their own enterprises, users must be careful when installing test equipment for the first time, so that professional personnel can correctly install test equipment.

After the successful installation of charcoal machine equipment, it is necessary to carry out debugging and commissioning to determine the installation of equipment in each production line. There is no problem in the docking start-up test. The main checking process of charcoal machine equipment test should be paid attention to is divided into the following steps:

1. Host debugging. Firstly, the empty car runs the bar making machine to rotate one or two times to see whether the rotation is smooth and whether the gear matching is normal.

2. Check whether the motor works properly. Open the temperature control button on the bar maker.

3. Check whether all parts of the dryer are complete, whether the pipes are sealed, and whether the fans and stoves are normal.

4. Open the burner and adjust the flame according to the temperature to see if the temperature is normal.

5. Check the internal structure of carbonization furnace, flue gas purification device, condenser, etc.

6. After checking the charcoal machine equipment, there is no abnormal operation.

After choosing and purchasing the charcoal machine, the user should do a good job in the installation steps of the test equipment, in order to know whether there is a fault in the equipment, so as to carry out good maintenance or installation, and then when the first time is used, understand the matters needing attention, so as to ensure the normal production of the charcoal machine equipment.